A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-1038010.png)
‹› The groove of sealing surface must be completely filled with sealant.
‹› Sealant beads must be 1.5 to 2.0 mm above sealing surface.
‹› The sealant bead - 2 - must be pulled through as shown in the illustration even though the groove is intermittent.
-
Insert seals - arrows - in lower timing chain cover grooves.
-
Set lower timing chain cover in place, guiding cover at an angle from below onto sealing surface of the cylinder block and cylinder head.