A4 Sedan V6-3.2L (BKH) (2007)
-
Remove front exhaust pipe with catalytic converter.
Installing
Installation is in reverse order of removal, noting the following:
‹› Replace gaskets and self-locking nuts.
‹› During installation, all cable ties must be re-installed at the same location.
‹› Electrical wire of oxygen sensor must always be secured in the same position when installing so that contact with the exhaust pipe is avoided.
-
Align exhaust system. Refer to => [ Exhaust System, Installing ] See: Service and Repair/Removal and Replacement/Exhaust System, Installing.
‹› Individual components of exhaust system mounting => [ Individual left mounting components - vehicles
with manual transmission ] See: Service and Repair/Removal and Replacement/Exhaust System Component Overview
Tightening specifications