A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-1135004.png)
-
Remove nuts - 7 - and - 9 - and remove bracket for heat shield.
-
Remove nuts - 1 through 6 - and - 8 - and remove exhaust manifold.
Installing
Installation is in reverse order of removal, noting the following:
‹› Replace gaskets and self-locking nuts.
‹› During installation, all cable ties must be re-installed at the same location.
-
Fasten exhaust manifold together with heat shield bracket in 2 steps according to the indicated tightening sequence, as follows.