A4 Sedan V6-3.2L (BKH) (2007)
/Page-4654002.png)
-
Remove bolts - 1 - and - 2 -.
-
Remove low beam housing cover from headlamp housing - arrow -.
-
Disengage electrical wiring at guides - arrow -.
-
Disconnect electrical connector - 4 -.
-
Release spring clips - 1 - and - 3 - and remove gas-discharge lamp - 2 - from housing.
Installing
Install in reverse order of removal, observing the following:
-
Insert the new HID bulb into the housing without touching the bulb with bare hands.
‹› Observe installation position: Electrical connection must always face downward.
-
Secure gas-discharge lamp with spring clips.
-
Connect battery. Required actions => See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery.
Tightening Specifications