audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ATF Changing or Filling After Repairs|Page 2059 > < Gear Oil Level In Front Final Drive, Checking|Page 2056
Page 1
background image

Fluid - CVT: Service and Repair
ATF Changing or Filling After Repairs

ATF Changing or Filling after Repairs

‹› Rules of cleanliness for working on transmissions. Refer to => [ Clean Working Conditions ] See: Transmission and Drivetrain/Continuously

Variable Transmission/Transaxle/Service Precautions/01J Transmission/Clean Working Conditions.

‹› General repair information. Refer to => [ General Repair Information ] See: Transmission and Drivetrain/Continuously Variable

Transmission/Transaxle/Service and Repair/Procedures/01J Transmission/General Repair Information. 

Special tools, testers and auxiliary items required

‹› Triple square socket driver (3357)

‹› ATF filler system F/CVT transmission (VAS 5162)

‹› Old oil collecting and extracting device (VAG 1782 )

‹› Safety glasses

Work Procedure

‹› Move vehicle onto a lifting platform or over a work pit so that it stands absolutely horizontal.

CAUTION!
Do not allow the engine to run without filling with Automatic Transmission Fluid (ATF) and do not tow the vehicle.

‹› Rules of cleanliness for working on transmissions. Refer to => [ Clean Working Conditions ] See: Transmission and Drivetrain/Continuously

Variable Transmission/Transaxle/Service Precautions/01J Transmission/Clean Working Conditions.

‹› General repair information. Refer to => [ General Repair Information ] See: Transmission and Drivetrain/Continuously Variable

Transmission/Transaxle/Service and Repair/Procedures/01J Transmission/General Repair Information. 

‹› Observe disposal regulations!

‹› Always blow compressed air through the ATF cooler and pipes (max. 10 mbar) and replace the auxiliary ATF filter before installing a replacement

transmission. Refer to => [ Auxiliary ATF Filter ] See: Filters/Fluid Filter - CVT/Service and Repair/Removal and Replacement/01J
Transmission/Auxiliary ATF Filter.

-

Fill the ATF filler system F/CVT transmission ( VAS 5162) with ATF for CVT transmissions.

‹› ATF specification, refer to => [ Capacities ] See: Specifications/Capacity Specifications/01J Continuously Variable Transmission.

CAUTION!
The ATF filler tool must be clean and the ATF must not be mixed with any other ATF oils!

-

Secure the filled reservoir of the ATF filler system F/CVT transmission (VAS 5162) as high as possible on the vehicle. 

ATF Changing or Filling After Repairs|Page 2059 > < Gear Oil Level In Front Final Drive, Checking|Page 2056