A4 Sedan V6-3.2L (BKH) (2007)
/Page-714003.png)
-
Rotate shut-off valve in direction of filler hose - lower arrow -. ATF flows into transmission.
-
Fill at least 4.5 to liters ATF into transmission.
-
Selector lever in "P", start engine and let it run at idle.
For vehicles as of model year 2005:
^
Selector lever in position "P"
-
Let engine run at high speed at a minimum of 2500 RPM by depressing accelerator pedal.
CAUTION!
It is necessary to run engine at high speed so that ATF pump is ventilated after performing repairs on the transmission.
All model years:
-
Check ATF level and top off.
Note:
^
Observe all notes and test requirements for "Checking ATF level and topping off".