A4 Sedan V6-3.2L (BKH) (2007)
-
Install and tighten the ATF drain plug.
‹› Tightening specification : 24 Nm.
-
Remove the ATF inspection plug - B -.
-
Thread the connection on the shut off valve of the ATF filler system F/CVT transmission (VAS 5162) into the opening of the ATF inspection plug
- B -.
-
Rotate the shut off valve in the direction of the filler hose - lower arrow -. The ATF then flows into the transmission.
-
Fill the transmission with at least 4.5 liters of ATF.
-
With the selector lever in the "P" position, start the engine and let the engine idle.
For Vehicles as of MY 2005:
‹› Selector lever in the "P" position.
-
Let the engine run at a high speed, a minimum of 2500 RPM by pressing the accelerator pedal.