A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-2765002.png)
-
Remove plenum chamber E-box cover - arrows -.
-
Pry securing bracket off - arrows - with the help of a screwdriver.
-
Set aside Engine Control Module (ECM) with wires still connected.
-
Disengage transmission control module retaining bracket.
-
Set aside Transmission Control Module (TCM) with wires still connected.
-
If present, cut through cable ties.
-
Remove the rear connector on the connector strip.
-
Remove electrical wiring harness - 2 -.