A4 Sedan V6-3.2L (BKH) (2007)
-
Remove bolts - 1 - and - 3 -.
-
Unclip the corresponding connector base.
‹› Check the exact assignment for connector station E-Box plenum chamber in the current wiring diagram. Refer to Wring diagrams,
Troubleshooting & Component locations.
Installing
Install in reverse order of removal, observing the following:
‹› All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
-
Install driver's storage compartment.
-
Connect battery. Required actions => See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery.
Tightening Specifications