A5
Hydraulic unit -N55- with ABS control unit -J104- - overview |
1 - | ABS hydraulic unit -N55- with ABS control unit -J104- |
q | Fitting location: In engine compartment (front left) |
q | Removing and installing → Chapter |
q | Hydraulic unit -N55- with integrated brake pressure sender -G201- and ABS control unit -J104- together form the hydraulic control unit |
q | These components must not be separated |
q | Do not unplug connector before completing self-diagnosis |
q | Switch off ignition before detaching connector |
q | Brake pressure sender -G201- is integrated in hydraulic unit -N55- and cannot be renewed separately |
Caution
|
2 - | Bracket for ESP |
q | The bracket cannot be removed |
3 - | Electrical connector for control unit -J104- |
4 - | Brake line |
q | To brake master cylinder |
q | 14 Nm |
5 - | Brake line |
q | To brake master cylinder |
q | 14 Nm |
6 - | Brake lines |
q | Hydraulic unit to front right brake caliper |
q | 14 Nm |
q | Hydraulic unit to front left brake caliper |
q | 14 Nm |
q | Hydraulic unit to rear left brake caliper |
q | 14 Nm |
q | Hydraulic unit to rear right brake caliper |
q | 14 Nm |