audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing gear detector switchF208 > < Transporting gearbox
Checking oil level in manual gearbox
Checking oil level in manual gearbox
Procedure
  Note
The vehicle must be horizontal when checking gear oil level.
   
–  If fitted, remove rear noise insulation -2- → Rep. gr.66.
  A10-11100
–  To check gear oil level, unscrew oil filler plug -arrow-.
l  Specification: Oil level is correct when gearbox oil is up to lower edge of filler hole.
–  Top up with gear oil if necessary. Specification → Chapter.
–  Screw in oil filler plug.
Tightening torque
  A34-10470
ComponentNm
Oil filler plug45

   

Removing and installing gear detector switchF208 > < Transporting gearbox