Note for service - „Advanced Key“ diagnosis |
Diagnosis of the „Advanced Key“ system is performed by the convenience system central control unit -J393- at diagnosis address „05 - Entry and start authorisation“. |
Related functional checks can be found in „Guided Fault Finding“ under „05 - Entry and start authorisation (=> in -J393)“. |
Note The functional checks for the components of the „Advanced Key“ system can only be included in the test plan if control unit variant „05 - Vehicle authorisation system with Keyless Entry“ was selected in the „vehicle system test“ (i.e. when „Guided Fault Finding“ was started). If selected, the control unit variant is shown on a black background. If variant „05 - Vehicle authorisation system with Keyless Entry“ is not automatically detected, it must be selected manually. Only then can corresponding functional checks for „Advanced Key“ be entered in the test plan. |
|
|
|