A6 Quattro Sedan V8-4.2L (BVJ) (2007)
-
Remove hood seal on both fenders.
-
Unscrew 2 screws - arrow - on upper left and right lock carrier.
-
Turn special tool for Service Position Front End 3369 left and right in holes for lock carrier screws to unscrew the respective screws.
-
Unthread remaining bolts -arrows- at left and right.
-
Push lock carrier forward carefully.
Installing
Installation is reverse of removal, noting the following:
-
Install lock carrier with attachments.
-
Allow torque arm stop to make contact with rubber buffer with own weight and tighten bolts - arrow -.
-
Install headlights.
-
Install front bumper
-
Check headlight adjustment 4 F.
Tightening torque
Component
Nm
Torque arm mounting on lock carrier
40