A6 Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-7657003.png)
‹› Apply adhesive added to delivery casing between adhesive bands with a width of dia. 3 mm over entire width of spoiler.
‹› Place spoiler so that it comes in contact with and is centered on rear lid.
‹› Press spoiler down firmly beginning in center and working towards outside.
‹› Secure spoiler with adhesive tape while curing.
CAUTION!
Vehicle must stay at room temperature at least 4 hours after spoiler is installed.
4
Rear lid
5
Rear window
