A6 Quattro Wagon V6-3.2L (BKH) (2006)
/Page-2239005.png)
-
Release pressure fork with the knurled bolt still pulled.
-
Repeat the procedure on each valve.
Assembling
Assembly is performed in reverse order of removal, note the following:
-
Make sure all the roller rocker levers seat properly on the valve stem ends and are clipped onto the respective hydraulic adjusting elements.
-
Install camshafts. Refer to => [ Camshafts ] See: Camshaft, Lifters and Push Rods/Camshaft/Service and Repair.