A6 Sedan V6-2.8L (AHA) (1998)
Power Steering Fluid: Testing and Inspection
Power Steering Fluid Level, Checking
Power steering fluid level, checking
^
With engine not running, bring front wheels into straight-ahead position.
Fluid, when cold:
^
Remove cap.
^
Clean off dipstick with a clean rag.
^
Tighten cap by hand and remove again.
Note: Fluid level is only valid if cap has been screwed on.
^
Check oil level: Fluid level must be near -MIN- marking (up to 2 mm above or below marking).
Fluid, at operating temperature (from approximately 50°C):
^
Check oil level: Fluid level must be between "MIN" and "MAX" markings.
Note:
^
If fluid level is above specified range, oil must be drained.
^
If fluid level is below specified range, hydraulic system must be checked for leaks. It is not enough to simply top off with fluid.
^
Do not reuse fluid you have drained.