A6 Sedan V6-2.8L (ATQ) (2000)
Brake Light Switch: Adjustments
Brake light switch -F-, adjusting
Before adjusting, pedal cluster must be bolted tightly to brake booster and instrument panel carrier.
For pedal bracket with internal thread for mounting brake light switch
1. Brake light switch
2. Hex-nut, M12 x 1.5
Part No. N 011020 8
3. Brake pedal
Note: A spring washer, Part No N 012 042 4 (not shown in illustration) is installed between nut -2and pedal bracket.
-
Turn brake light switch to adjust inward or outward as necessary to obtain dimension A- = 0.1- 0.5 mm, lock in place with nut and tighten nut
to 4.5 Nm.
-
Check dimension -A- again after tightening nut.
For spring clip mounted brake light switch