A6 Sedan V6-2.8L (ATQ) (2000)
![background image](/audi/a6_sedan/v6-2.8l_(atq)/Page-10182002.png)
1. Brake pedal contact surface
2. Spring clip
Insert in pedal bracket from rear
3. Pedal bracket
4. Brake light switch -F-
a. Specified dimension: max. 0.7 mm
Note: In order to assure sufficiently secure fitting, switch must not be installed more than once.
Adjusting switch
-
Guide switch -4- into installed clip -2- and press in until stop.
Notes:
^
Do not apply pressure to brake pedal!
^
Turn back switch if necessary, observe dimension -A-!