A8 Quattro Sedan V8-4.2L (AUX) (2001)
-
Insert securing rod - 2 - for lock cylinder into socket at release lever - 1 - and snap into place.
-
Tilt operating clip - 3 - 90 degrees (not shown), insert into door lock release lever - 4 - and tilt back upward.
-
Clip securing rod - 2 - into operating clip - 3 -.
-
Do not bend locking lever - 4 - at door lock - 5 - (maximum play at locking lever 1 mm Fig. 2)
-
Slide up casing on operating clip - 3 -.
Fig. 2 Adjusting Locking Lever Play
-
Insert securing rod - 1 - into operating clip - 2 - so that dimension - a - at the locking lever - 4 - is approx. 1 mm.
-
During this, dimension - a - = 13 mm (adjustment depth for securing rod) must be maintained Fig. 3.
Fig. 3 Adjustment Depth For Securing Rod
-
Dimension - a - of securing rod - 1 - must be 13 mm "3 mm" when properly adjusted.