A8 Quattro Sedan V8-4.2L (AUX) (2001)
![background image](/audi/a8_quattro_sedan/v8-4.2l_(aux)/Page-1981003.png)
-
Pry lock clip - 1 - at Bowden cable - 2 - of door opener.
-
Unhook nipple of Bowden cable with retaining clip - 3 - at door opener.
NOTE: Make sure that the retaining clip of Bowden cable does not get lost.
-
Loosen clip - 1 - of air duct - 2 - at door trim.
-
Disconnect all connectors for wiring harness door trim.
-
Remove retaining clips for wiring harness.
Installing
Installation is done in reverse sequence, noting the following:
-
Make sure that all retaining clips - 2 - lock correctly into support for door installation components.