A8 Quattro Sedan V8-4.2L (AUX) (2001)
^
To replace, remove and install oil pan
29 - O-ring
^
Always replace when installing
^
Coat with Vaseline
30 - Spacer sleeve
^
Height:Tighten to 8.7 mm (0.34 inch)
31 - Sensor for * transmission RPM -G182-
32 - Screw
^
Tighten to 5 Nm (44 inch lbs.)
33 - Wiring harness
^
Transmission fluid temperature sensor -G93- integrated into wiring harness
34 - Screw
^
For mounting ATF sump
^
Tighten to 5 Nm (44 inch lbs.)
35 - O-ring
^
Always replace
^
Coat with Vaseline
36 - Circlip
^
Replace if damaged
37 - Magnet
^
4 pieces in bead of oil pan
^
Always clean
^
Make sure entire surface contacts oil pan
38 - O-ring
^
Always replace
39 - ATF filler plug
^
80 Nm (59 ft. lbs.)
^
Hex recess: 17 mm