A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Check the rubber bushings for cracks. If damaged, replace the stabilizer bar.
Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
-
Insert the stabilizer bar - 1 - in the engine carrier openings with the cast rubber bushings and clamps.
-
Install the right and left bolts - 2 - evenly and tighten to specifications. Refer to - item 20 - in the => [ Subframe, Engine Carrier and Stabilizer Bar
Assembly Overview ] See: Subframe, Engine Carrier and Stabilizer Bar Assembly Overview.
-
Install the connecting links. Refer to => [ Connecting Link ] See: Suspension Strut / Shock Absorber/Service and Repair/Front Suspension.
-
Install the noise insulation.
-
Place the vehicle on its wheels. Refer to => [ Positioning Vehicle on the Hoist and on its Wheels ] See: Service and Repair/Procedures/Positioning
Vehicle on the Hoist and on its Wheels.