A8 Quattro Sedan V8-4.2L (BVJ) (2008)
Alignment: Procedures
Rear Toe, Adjusting
Rear Toe, Adjusting
-
Remove the nut - 1 - from the tie rod - 2 - to subframe connection.
-
Adjust the toe by turning the eccentric bolt - 3 -.
Use the hole - arrow - in the subframe to turn the eccentric bolt.
-
Install a new nut - 1 - and tighten it.
Specified values for wheel alignment. Refer to => [ Wheel Alignment Specifications ] See: Specifications.
‹› The maximum adjustment range is 90 degrees to the left or right of the center position.
‹› The geometric drive axle is automatically changed when individual toe settings are changed.
-
After tightening the nut - 1 -, check the toe value again.