A8 Sedan V8-3.7L (AEW) (1997)
-
Connect VAG1527B LED voltage tester between harness connector terminal 3 and engine Ground.
-
Briefly operate starter (engine can start briefly).
LED must light up.
If LED does not light:
-
Check wiring for open circuit or short to Ground between connector terminal 3 and fuse.
If fuses and wiring are OK but LED still does not light:
-
Check fuel pump relay. See: Fuel Pump/Fuel Pump Relay/Testing and Inspection
If voltage supply is OK:
-
Connect VAG1598/19 test box to ECM harness connector. Refer to "Scan Tool Testing/Scan Tool Connecting and Initial Checks/VAG1598/19
Test Box, Connecting" See: Computers and Control Systems/Testing and Inspection