A8 Sedan V8-3.7L (AEW) (1997)
-
Check wiring for open or short circuits between MAF sensor connector terminal 1 (Ground) and ECM/test box socket E7.
-
If necessary, repair open circuit between connector terminal 1 and ECM terminal E7.
If voltage supply is OK:
-
Check signal wiring.
Checking MAF sensor signal wiring
-
Connect VAG1598/19 test box to ECM harness connector. Refer to "Scan Tool Testing/Scan Tool Connecting and Initial Checks/VAG1598/19
Test Box, Connecting" See: Computers and Control Systems/Testing and Inspection