A8L V8-4.2L (BFM) (2004)
Indicated on display of VAS 5051:
^
Request in display zone -1- to select a display group.
^
Display zone -2- shows a keyboard.
-
Enter "6" to select "Channel number 06" via the keypad in display zone -2- and confirm entry with "Q key" (Selecting brake pad thickness).
Indicated on display of VAS 5051:
^
Request in display zone -1- to "Read and test channel 6".
^
Zone -2- displays the specified limits for brake pad thickness.
^
Zone -3- displays a sliding bar diagram with a number representing the currently stored pad thickness.
-
The pad thickness can be changed within the specified limits (314) via the sliding bar.
Note:
^
If a pad thickness exceeds the specified limits is entered via the sliding bar, it will be indicated but not accepted.
^
The display resets automatically if the pad thickness entered via the sliding bar is too large or too small.
The values can be entered via the keyboard as well.
-
Press key 4- (to enter the values via keyboard).