A8L V8-4.2L (BFM) (2004)
Instrument Panel Control Module: Service and Repair
Front Information Display Control Head Control Module -J523-, Removing and Installing
Front Information Display Control Head Control Module -J523-, Removing And Installing
Removing
-
If control head is to be replaced:
-
Use VAS 5051 Vehicle Diagnostic Testing and Information System in operating mode "Guided Fault Finding"
-
Select "Replace" for appropriate Control Module and follow tester prompts.
-
Remove glove box.
-
Disconnect all electrical connectors -2- from Control Module -1-.
-
Attach protective cap -1- to fiber-optic connector -2-.
-
Remove screws -arrows- (4 Nm) and remove Control Module -1-.
Installing
-
Install in reverse order of removal.