A8L V8-4.2L (BFM) (2004)
Repairs and Inspections Required After a Collision: Procedures
Rear Outer Floor Assembly Anchorage Point
Rear Outer Floor Assembly Anchorage Point
Removing
-
Remove rear seat bench => [ Rear Bench Seat ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seats.
-
Remove rear seatback => [ Front Door Trim ] See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Removal and Replacement/Front Door Trim and => [ Rear Backrest ] See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seats.
-
Remove screw - 2 -.
-
Disengage anchorage point - 1 -.
Installing
-
Engage anchorage point - 1 - in direction of arrow.
-
Install bolt - 2 -.
‹› Tightening torque: 55 Nm.