A8L V8-4.2L (BFM) (2004)
Rear Knuckle: Removal and Replacement
Front Suspension
Wheel Hub and Bearing
Special tools, testers and auxiliary items required
‹› Thrust plate (VW 401)
‹› Thrust plate (VW 402)
‹› Punch (VW 407)
‹› Thrust disc (VW 412)
‹› Thrust piece (VW 473)
‹› Sleeve (40-20)
‹› Thrust piece (T40089)
‹› Kukko separating tool 22-115 mm (17/2)
-
Remove the wheel hub and bearing. Refer to => [ Wheel Hub and Bearing ] See: Wheel Hub/Service and Repair/Front Suspension/Wheel Hub and
Bearing.
Pressing wheel hub out of a 92 mm diameter wheel bearing housing
Remove the bearing inner race from the hub.