A8L V8-4.2L (BFM) (2004)
/Page-3569004.png)
^
Insert transmission mount -D- together with heat shield -E- and washer -F- in transmission support.
^
Tighten nut with shim washer -1- hand tight.
Left transmission support
^
Bolt left transmission support -G- to transmission.
^
Insert transmission mount -D- together with heat shield -E- and washer -F- in transmission support.
^
Tighten nut with shim washer -I- hand tight.
^
Install bolts -1- and -2- at rear of subframe with support -A-. Tightening torques: Refer to specifications.
