A8L V8-4.2L (BFM) (2004)
Transmission Mount: Removal and Replacement
Front Transmission Support and Transmission Mount
Front Transmission Support and Transmission Mount
-
Drive the vehicle onto a service pit so that all 4 tires remain on the ground.
-
Remove the air duct - 1 - from the transmission.
-
Remove the noise insulation - 2 - from underneath the engine/transmission.
-
Remove bolts - 1 - and - 2 - at rear of subframe on both sides of vehicle.
-
Take out the supports for the subframe.- A -.
-
Remove both bolts on the left and right - B - for fastening the transmission mount on the subframe.