A8L Quattro Sedan W12-6.0L (BSB) (2005)
Installing
Perform installation in the reverse order of removal, noting the following:
‹› During installation, all cable ties must be re-installed at the same location.
‹› Replace gaskets, seals and O-rings.
-
Press nubs of intake manifold lower part gasket into holes on cylinder heads.
-
Install intake manifold lower part together with fuel rail.
-
Install intake manifold upper part => [ Intake Manifold Upper Section ] See: Intake Manifold Upper Section/Multiport Fuel Injection.
Tightening Specifications