A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Before installing instrument panel, check foam seals - A - to - D -, replace damaged seals if necessary.
-
Install removed components, except drivers storage compartment and glove compartment, in reverse order.
-
Check coolant hoses to heater cores are secured.
-
Bleed coolant circuit (connect 2-pin harness connector to pump valve unit only after bleeding coolant circuit.
-
Before installing drivers storage compartment and glove compartment, check cooling system for leaks, paying particular attention to connection
between coolant lines and heater cores.
-
Install glove compartment, drivers storage compartment and remaining components removed.
-
Evacuate and re-charge refrigerant circuit.