A8L Quattro Sedan W12-6.0L (BSB) (2005)
/Page-3072006.png)
-
Remove air duct - 1 - from transmission.
-
Remove sound insulation panel - 2 - below transmission.
-
Remove heat shield - 3 - for driveshaft.
-
Unbolt driveshaft - 4 - at transmission and tie up or support.
-
Unbolt heat shield - 5 - above driveshaft and push toward rear.
CAUTION: Transmission must not be supported at the transmission oil pan, otherwise it will be damaged and must be replaced.
