A8L Quattro Sedan W12-6.0L (BSB) (2005)
-
Tighten transmission supports - A - with transmission mount in a vise with protective jaws.
-
Remove the transmission mount bolts - E -.
-
Attach the new transmission mount to the transmission supports so that the narrow side - arrow 2 - of the transmission mount faces outward.
Otherwise the transmission mount must be placed on the marking (notation from removal).
‹› In order to ensure the exact installation position of the transmission mount, follow these steps:
-
First hand-tighten the transmission supports with transmission mount onto the transmission.
-
Next, check the bolt holes for the fastening bolts in the tunnel crossmember - D -.
-
If necessary, align the transmission mount once more with the transmission supports to avoid stress.
Installing
Installation is in reverse order of removal. Pay attention to the following:
Tightening Specifications
Left transmission support