A8L Quattro Sedan W12-6.0L (BSB) (2005)
/Page-3152001.png)
Drive/Propeller Shaft: Removal and Replacement
Flange/Driveshaft Seal
Flange/Driveshaft Seal
Special tools, testers and auxiliary items required
‹› Needle Bearing Drift (VW 295 A)
‹› Thrust Plate (VW 402)
‹› Punch (VW 408 A)
‹› Support Channels (VW 457)
‹› - 3 - Separating Device 22 to 75 mm, for example (Kukko 17/1)
Press the Protective Ring - A - Off the Flange/Driveshaft.
B Separating device 12 to 75 mm, for example (Kukko 17/1)
Installation Location of the Protective Ring - A - on the Flange/Driveshaft
‹› Insert the protective ring - A - with the ridge - arrow 1 - in the groove - arrow 2 - on the flange - B -. The smaller outer diameter - arrow 3 - faces
toward the flange.
Press the Protective Ring - A - onto the Flange/Driveshaft.
