Allroad Quattro V6-2.7L Turbo (BEL) (2003)
![background image](/audi/allroad_quattro/v6-2.7l_turbo_(bel)/Page-5362003.png)
Installing
-
Push shaft - 3 - through backrest motor - 2 - and backrest frame - 1 -.
-
Secure backrest motor - 2 - between two plastic washers - 7 - at threaded sleeve - 6 - using mounting bolt - 5 -.
-
Tap locking washer - 4 - onto shaft - 3 -.
3
-
Shaft
4
-
Locking washer
5
-
Mounting screw
6
-
Threaded sleeve
7
-
Plastic washers (2x)
8-
Harness connector