Cabriolet V6-2.8L (AFC) (1995)
-
Remove retaining screw for tensioning strap.
-
Pull and remove tensioning strap through loop.
-
Pull convertible top cover away from inside of roof frame. Cover is glued in place.
-
Pull off convertible top cover at sides underneath seals that were previously removed.
-
Drill out rivet head -A- from linkage and remove tensioning strap -1-.
Note: On later vehicles the tensioning strap is secured to the linkage further toward the rear (arrow -B-).
-
Pull convertible top cover off rear cross rail -1-.