Cabriolet V6-2.8L (AFC) (1995)
/Page-2052003.png)
-
Cut open tie wrap on outside of bracket.
Notes:
When installing the hydraulic hoses, the marking (arrow) must be below the tie wrap.
Mark the letters identifying the hydraulic hoses on the hydraulic cylinder
-
Remove union nuts from connections.
-
Install new hydraulic hoses.
Union nut tightening torque: 28 Nm (21 ft lb).
CAUTION: Do not interchange the hydraulic hoses when connecting.
-
Route hydraulic hoses and electrical wiring as shown and secure with tie wraps -1-.
