Cabriolet V6-2.8L (AFC) (1995)
^
Reconnect electrical connectors to all injectors
^
Reinstall engine cover brackets using new screws from kit and torque to 10 Nm (7 ft lb)
^
Reconnect fuel pressure and return line and torque to 25 Nm (18 ft lb)
^
Install new vacuum hose from kit between fuel pressure regulator and vacuum line "T"
^
Reinstall ignition cable holding clips
^
Reinstall ignition cables into holding clips
^
Reinstall fuel pump fuse in fuse box
^
Start engine
^
Disconnect vacuum line to fuel pressure regulator and check for vacuum. Reconnect vacuum line after a maximum of 2 minutes, and check for fuel
leaks at fuel line connections and injectors
^
Turn engine off, reinstall engine cover and close hood
^
Properly dispose of all removed parts