Cabriolet V6-2.8L (AFC) (1995)
Fig. 5 Checking distances between rear axle and wheelhousings
-
Install both wheel bolts and fasten brake discs.
-
Place straightedge wheel mounting surface of brake disc and use depth gauge to measure distance between strut adapter and wheelhousing on
left and right sides.
-
Measuring point is bead on strut adapter (arrow at a in illustration).
-
If necessary loosen bearing mounts and slide rear axle in transverse direction until spacing is equal.
-
Maximum difference between left and right sides: 2.0 mm (0.08 in.) measured at strut adapter
-
Tighten mounting bolts on both rear beam axle bearing mounts to specified torque.