Cabriolet V6-2.8L (AFC) (1995)
Fig. 3 Selector shaft with locking washer
-
(A In illustration) O-ring
-
The selector shaft is held in place by a locking washer (arrow in illustration).
Fig. 4 Installing screws for detent spring
-
Sequence:
-
Install screws (1 and 2 in illustration) (screw in to approx. 3 threads).
-
Tighten screw (2 in illustration).
-
Tighten to: 10 Nm (84 inch lbs)
-
Tighten screw (1 in illustration).
-
Tighten to: 10 Nm (84 inch lbs)
Fig. 5 Driving in end cover