Q5 Quattro V6-3.2L (CALB) (2009)
‹› Place Wheel Center Sensor (VAS 6350/1) on wheels so that anti-theft wheel bolts are not connected with wheel center sensor.
-
Adjust measuring paddle with aid of lock nuts so that they move freely just above the floor.
‹› The measuring paddles must move easily.
‹› The measuring paddles must be vertical.
-
Position Calibration Device (VAS 6350) at distance - a - from rear wheels.
‹› Dimension - a - = 1,700 mm
-
Switch distance laser (VAS 6350/2) on with ON button.
Display on (VAS 6350/2):
‹› "- - - m"
‹› Laser is switched on at same time.
-
For distance measurement, hold the distance laser (VAS 6350/2 ) - item 2 - flush to the stop bracket as illustrated.