Q5 Quattro V6-3.2L (CALB) (2009)
Front Door Panel: Service and Repair
Front Door Trim
Front Door Trim
‹› Removal and installation are same for right and left.
Special tools, testers and auxiliary items required
‹› Pliers (3392)
Removing
-
Switch the ignition off and remove the ignition key.
-
Remove the trim panel => [ Trim Molding ].
-
Remove the bolts - 1 through 4 -.
-
Beginning at the bottom rear curve, unclip the door trim from the door using the pliers (3392) by sliding them between the door trim and the door
in the securing clip area.
‹› Position of the retaining clips - arrows -.