Q5 Quattro V6-3.2L (CALB) (2009)
/Page-2778002.png)
-
Tilt the door handle - 1 - outward - arrow - and remove it from the mount on the mounting bracket.
-
In vehicles with the keyless entry system, disconnect the connector - 2 - on the door handle.
Installation
-
Replace the door handle washers - 1 - and - 2 - if damaged or brittle.
-
Insert the door handle - 1 - - arrow A -. It must engage in the mount - 2 - on the mounting bracket - 3 -.
