Q5 Quattro V6-3.2L (CALB) (2009)
Rear Door Latch: Service and Repair
Rear Door Lock
Door Lock
Removing
-
Remove housing. Refer to => [ Housing ] See: Service and Repair/Rear Housing
-
Remove the door trim..
-
Remove the door cover. Refer to => [ Door Cover ]
CAUTION!
There is a risk of malfunction. When removing and installing, make sure the actuating link is not kinked or damaged.
-
Turn the actuating link on the lever - 1 - 90° in the - direction of arrow A - and remove it from the bracket - 2 -.
-
Rotate the actuating link on the door lock operating lever - 3 - in the - direction of arrow B -.
‹› The actuating link must be aligned with the opening on the operating lever.
-
Disengage the actuating link from the operating lever.
-
Remove the bolts - arrows -.
-
Remove the door lock - 1 - and disconnect the electrical connector - 2 -.