Q5 Quattro V6-3.2L (CALB) (2009)
Rear Door Latch: Service and Repair
Rear Door Lock Actuating Link
Door Lock Actuating Link
Removing
-
Remove the door trim..
-
Remove the door cover. Refer to => [ Door Cover ] .
CAUTION!
There is a risk of malfunction. When removing and installing, make sure not to bend or damage the actuating link.
-
Turn the actuating link on the lever - 1 - 90° in the - direction of arrow A - and remove it from the bracket - 2 -.
-
Rotate the actuating link on the door lock operating lever - 3 - in the - direction of arrow B -.
‹› The actuating link must be aligned with the opening on the operating lever.
-
Disengage the actuating link - 1 - on the operating lever by pressing the bracket - 3 - out of the mount on the mounting bracket - 2 - - arrow -.
-
Remove the operating shaft.
Installation