Q5 Quattro V6-3.2L (CALB) (2009)
Rear Door Panel: Service and Repair
Rear Pull Handle
Rear Pull Handle
‹› Removal and installation are same for right and left.
Removing
-
Remove the rear door trim => [ Rear Door Trim ].
-
Remove the rear armrest.
-
Remove the screws - 1 - and - 2 -.
-
Remove the pull handle - 1 - from the door panel.
-
Disconnect the connector - 2 - on the power window switch.
Installing
Installation is performed in the reverse order of removal.
Tightening specifications => [ Door Trim Assembly Overview ] See: Rear Door Trim Overview.