Q5 Quattro V6-3.2L (CALB) (2009)
Rear Cross-Member: Service and Repair
Tie Rod
Tie Rod
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1332)
‹› Ring Spanner Insert AF 21 (T40183)
‹› No illustration, commercially available pawl with fine gear
Removing
-
Determine dimension - a - from the center of the wheel to the lower edge of the wheel housing before starting work while the vehicle is resting on
its wheels.
-
Place the vehicle on a hoist.
-
Remove wheel.
-
Remove bolt - 4 -.
-
Mark the position of bolt - 1 - to the subframe - 2 -.
-
Remove nut and bolt - 1 -.