Q5 Quattro V6-3.2L (CALB) (2009)
Front Subframe: Service and Repair
Subframe Shield
Subframe Shield
Removing
-
Remove crossbrace. Refer to => [ Subframe Crossbrace ] See: Subframe Crossbrace.
-
Remove bolts - arrows -.
-
Remove subframe shield - 1 -.
Installing
Installation is in reverse order of removal. Observe the following when doing so:
‹› Insert square nuts into the cast recesses before installing the subframe shield => [ (Item 16) Square nut ] See: Steering and
Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Crossbrace, Stabilizer Bar, Coupling Rod and Subframe
Shield Assembly Overview.
Tightening specifications. Refer to: => [ Subframe, Crossbrace, Stabilizer Bar, Coupling Rod and Subframe Shield Assembly Overview ] See:
Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Crossbrace, Stabilizer Bar, Coupling Rod and
Subframe Shield Assembly Overview